Sundström mask cleaning guide

April 29, 2020

The Sundström SR100 is a reusable half-face. The pre filter is not required. As it would get wet with our revised cleaning process, if you have a pre filter you must remove it from your respirator and discard.

In-between sessions

1. Whilst still wearing the mask on your face wipe over with clinell wipe
2. Remove gloves
3. Put on new gloves
4. Remove your mask
5. Clean inside the mask all crevices with clinell allow to dry for 60 Seconds
6. Wipe the mask with clean water and a paper towel and dry ( this removes any residue)
7. Wash hands

End of session

• Repeat actions as above
• Remove black cap and clean with clinell both sides
• Remove hepa filter and spray inlet both side of the filter with 70 per cent alcohol (Klericide spray)
• Spray the whole of the mask with a 70 per cent alcohol spray;
• Must be left out in an open space to dry on a paper towel

Note: Filters must be changed every 3 months. It is the responsibility of individual colleagues who must date their filters on first use of the mask.

For more information please see Sundstorm mask cleaning information sheet